Search This Blog

Wednesday, September 9, 2009

Configuring a Linksys SPA400 Gateway with a 3CX IP PBX

The following screen shots show the proper configuration of the Linksys/Sipura SPA400 as a PSTN gateway interface for the 3CX IP PBX software.

Linksys/Sipura SPA400
Admin Guide

Basic Setup



SPA9000 Interface



Voice Configuration



3CX IP PBX
3CX Admin Guide

Gateway Configuration






Line Configuration





Jaydien Network Solutions - 877.561.6734 |
www.jaydien.com
Posted by Jaydien Network Solutions at 3:32 PM

3 comments:

  1. UnknownFebruary 28, 2014 at 2:39 PM

    Hi, what are the voice configuration settings? Your image link appears to be broken. I'm trying to setup a Linksys Spa400 my self. I can't get the inbound calls to work and I think that my issue is that the Spa400 isn't passing the call through to 3cx. Any help you could give would be very great full. Sorry I know this is an old post so hope you can still help me.

    Thanks
    Simon

    ReplyDelete
  2. AnonymousApril 28, 2014 at 7:03 AM

    I am having the same issue with inbound calls not coming through, i can dial out great.

    ReplyDelete
  3. AnonymousOctober 6, 2017 at 6:41 AM

    Though an old thread/blog/post, I too am having the same trouble (unable to get incoming calls), but can dial out no issues (with a slight delay :) - all good though). I'm unsure as to what is causing the incoming 'issue', but should I figure this out, I'll be sure to 'post' back the result. Using 3cx 15.5; SPA400 v1.1.2.2; also have a SPA9000 on the network as well (not 'connected' - Nothing is 'directed' at it), but I wouldn't think this would be the issue. Aside from this, I'll let you guys know should I manage to get this figured out, as it seems there still hasn't been any 'update' on this yet. Since 2014 - 2017, seems a little odd there isn't an answer as yet :|, odd....... Oh well.

    ReplyDelete

Subscribe to: Post Comments (Atom)